Virtual Console FCD-CFxx Información técnica Pagina 527

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 920
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 526
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
3.3.5.17 ENC17 : "An Enclosure Management Module (EMM) has been discovered on
<Enclosure Name>."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
3.3.5.18 ENC18 : "Communication with <enclosure name> was lost."
When event is generated, message will have the following substitutions:
<enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
3.3.5.19 ENC19 : "<Enclosure Management Module Name> has failed."
When event is generated, message will have the following substitutions:
<Enclosure Management Module Name> = "EMM 0 in Enclosure 0 on Connector 1 of RAID Controller
in Slot 2"
3.3.5.20 ENC21 : "<Enclosure elements name> has been removed."
When event is generated, message will have the following substitutions:
<Enclosure elements name> = "FAN1000"
3.3.5.21 ENC22 : "The <Enclosure Name> has a bad sensor <args>."
When event is generated, message will have the following substitutions:
<Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
<args> = " not implemented"
3.3.5.22 ENC23 : "<enclosure name> - Issue with PHY <PHY data>."
When event is generated, message will have the following substitutions:
<enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
<PHY data> = " not implemented"
3.3.5.23 ENC24 : "Communication with <enclosure name> is intermittent."
When event is generated, message will have the following substitutions:
<enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
3.3.5.24 ENC25 : "<enclosure name> has a hardware error."
When event is generated, message will have the following substitutions:
<enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"
3.3.5.25 ENC26 : "<enclosure name> is not responding."
When event is generated, message will have the following substitutions:
527
Vista de pagina 526
1 2 ... 522 523 524 525 526 527 528 529 530 531 532 ... 919 920

Comentarios a estos manuales

Sin comentarios