• <Controller name> = "RAID Controller in Slot 5"
4.3.3.23 CTL48 : "A foreign configuration was detected on <controller name>."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
4.3.3.24 CTL49 : "The NVRAM has corrupted data on <Controller name>."
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
4.3.3.25 CTL50 : "The <Controller name> NVRAM has corrupt data."
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
4.3.3.26 CTL51 : "<Controller name> SAS port report: <message>"
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
• <message> = "SAS wide port 0 lost link on PHY 0"
4.3.3.27 CTL52 : "<Controller name> SAS port report: <args>"
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
• <args> = " not implemented."
4.3.3.28 CTL57 : "The factory default settings were restored on <controller Name>."
When event is generated, message will have the following substitutions:
• <controller Name> = "RAID Controller in Slot 5"
4.3.3.29 CTL58 : "<Controller name> SAS SMP communications error <args>"
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
• <args> = " not implemented"
4.3.3.30 CTL59 : "<Controller name> SAS expander error: <args>"
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
• <args> = " not implemented"
4.3.3.31 CTL61 : "Physical disks found missing from configuration during boot time on
<Controller name>."
When event is generated, message will have the following substitutions:
786
Comentarios a estos manuales